Steps for preparing your nails before using nail stickers or other nail art products.

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 

-All our nail stickers collections can be used on the natural nail. 
-Using a clear topcoat to hold them on the nail, for longer wear apply a new layer of topcoat  the next day.
-Use an thin topcoat for over the nail stickers, if the topcoat is to thick this can have a  negative effect on the nail sticker. They can become weak, or been soaked off.

 

Nailstickers

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
-Always handle the stickers with tweezers, so the glue on the back side won`t get damaged.

-When the sticker isn’t coming of easily from the sticker sheet, bend the plastic sheet, so the
 sticker springs up a bit.
-When you wish to color the nail before the sticker, be sure the base coat is 100% dry!
-When you’re using larger nail stickers, cut them when they are bigger then the nail.
-Place the nail sticker on the nail, when you’re using bigger nail stickers you can use an soft cuticle  pusher to smooth the sides with a little pressure.
-Place the nail sticker on the natural nail or polished nail, place 1x topcoat over the sticker.
-The best to use topcoats as thin (liquid) as possible, thicker topcoats can soften (weak) the sticker.
-When there’s some topcoat under the sticker, you can correct this with the soft cuticle pusher.
-For longer pleasure, apply a new layer of topcoat the next day.

Nail stickers French Tops

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
-For getting the nail sticker easier from the plastic sheet, you can gently bend the plastic sheet.

 So the sticker springs up a little bit. 
-Take the sticker from the sheet with tweezers. 
-Place the nail sticker in the middle of your nailtop, the nail sticker is not always equally width as the  nail,everything that falls over the nailtop you can file off later. 
-Rub the nail sticker gently but firmly on the nail. 
-File off what`s hanging over the nail top with downward movements.  
-Rub the nail sticker gently on the nail again.
-Place a topcoat. To asure longer wear apply a new layer of topcoat the next day.

Nail patch
-The material of the S collections is thinner.
-The normal collection is a bit thicker material, and need to be heaten on the back/glue side before  putting on the nail.

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
1. Select the nail foil that is closest to the size of your nail and trim it to fit exactly .

 The material is foil, you must heat the patch just before you put it on your nail. 
  (hair blower or heat lamp for 2 minutes) 
   For the best results heat the nail patch again after step 4.

2. Take the nail patch off the plastic sheet with tweezers.
3. Lay the rounded edge against the cuticle. 
4. Use an small sharp scissor to cut off excess foil from the sides. (then heat the nail patch)
5. Once the foil is in place ,rub all areas of the foil firmly with an soft cuticle pusher. 
6. While smoothing  the nail patch on the nails, stretch them to avoid uneven surface .
7. File off remaining excess material from the top, in a gentle downward motion using a file .
8. When you still see minor errors, you can use the cuticle pusher to correct. 
-Depending on what you do with your hands, it will last for a few days to 1 week.

Polish patch

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
1. Select the polish patch that`s closest to the size of your nail.

2. Remove upper film from polish patch, remove bottom film from polish patch.
3. Lay the rounded edge against the cuticle. 
4. Use the wooden stick to smooth the surface, stretch to avoid uneven surface.
5. File off remaining excess material in a gentle downward motion. 
-Depending on what you do with your hands, it will last for about 1 week.

 

Nail sticker tattoo`s

 Remark: All the white color is transparent! There`s no white color on the nail tattoo`s!

-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
-Use the nail tattoo on the natural nail or polished nail

-The best to use topcoats as thin (liquid) as possible, thicker topcoats can soften (weak) the tattoo.

1. Cut out the figure you want to use with sharp scissors.
2. Peel off the thin tattoo from the brown cardboard with tweezers.
3. Always handle the nail tattoo with tweezers, so the glue on the backside will not get damaged.
4. Place the nail tattoo on the nail, rub it gently on the nail, you can use a soft cuticle pusher.
5. Place 1x/2x topcoat over the nail tattoo.
-For longer pleasure, place a new layer of topcoat the next day.
-The nail tattoo can be used under gel nails!

Little stones & nail art

-Nail glue, put a tiny drop glue on the nail and lay the nailart on it.
-Thicker old nail polish, you can first varnish the whole nail and lay the nailart on the nail. 
  Or use it like the nail glue, put tiny drops on the nail and lay the nail art in it.

Bigger 3D nail art
-Natural nail, nail glue is necessary.
-Acrylic and gel nails you can lay the nailart in the material before it`s hard out. 

Users manual; Gel polish. (fingers & toe`s)


-Push back the cuticles.
-Buffer the nail surface with a buffer block and wipe them clean with pure alcohol. 
-Shake the bottle well before opening. Use a 36W UV lamp. (9W is also suitable)
-For the best results we advise to do the thumb separate from the other fingers, so the fingers lay  flat under the UV lamp, and the gel wont glide/move while curing.
1. Apply base coat, cure under UV lamp 2 minutes.

2. Remove the sticky layer with pure alcohol or polish remover without acetone! 
3. Apply color polish, cure under UV lamp 2 minutes. 

4. Repeat step 3 as many times as you wish for deeper color. 
   Mostly it`s 2 layers of color polish, how more layers how thicker your nail will be. 
   (You can mix colors, using different colors for different layers!)
5. Apply top coat, cure under UV lamp 2 minutes.

6. Remove the sticky layer with pure alcohol or polish remover without acetone! 

 How to remove the gel polish:


1. File of the top layer, this helps the acetone penetrate into the gel.
2. Soak your nails in to a manicure bowl with pure acetone for about 12 minutes, 
     the time depends on how many layers you have on!

3. Remove the gel by scraping with a metal cuticle pusher. 
4. Remove stubborn gel with a buffer or fine polish file.
5. Cream your nails and hands.

When you don`t have a manicure bowl or want to remove polish gel from your toe`s: 
1. File of the top layer, this helps the acetone penetrate into the gel.
2. Soak cotton balls into acetone, put this on the nail surface, wrap this in with tinfoil.
3. Let this soak in for about 15 minutes.4. Remove the gel by scraping with a metal cuticle pusher. 
5. Remove stubborn gel with a buffer or fine polish file.
6. Cream your nails,hands, toe`s. 

Shopping cart

No items in shopping cart.

15% DISCOUNT!!!
CODE: SAVE15
valid until 29-12-17 on orders above €5

Newsletter

Subscribe to our newsletter
Subscribe
© 2009 - 2017 fashionfornails | sitemap | rss | ecommerce software - powered by MyOnlineStore